Standard 8 and 10 - Fuel Hoses replacement kit NOW FOR ALL MODELS
NOW AVAILABLE FOR ALL MODELS with a new UK Made Main Hoses that are easier to cut and work with.
Set of hoses and hose clamps to replace fuel filler hoses on post 1954 Standard 8, 10,Pennant, Companion with the Filler Neck in the Near Side Wing.
Please refer to illustration 1
This replacement set comprises:
1 length of wide diameter fuel hose, which connects tank to filler pipe. New Kevlar reinforced moulded hose, no metal wire and UK made.
2 lengths of small breather connecting hose. Some installations will require only one of these hoses
6 hose clamps of the appropriate sizes.
All hoses supplied are proof against unleaded fuel and ethanol including E10 and higher.
NOT SUITABLE FOR VERY EARLY CARS WHERE THE FILLER NECK IS LOCATED IN THE MAIN BODY SHELL.
BUT NOW and Exclusive to the Club.
Very early cars fuel filler was located in the main body shell above the Near Side Wing.
The Tank Filler exited the top of the tank into the Boot area and the Filler Neck is a straight pipe from above. The two pipes are joined by a short length of hose within the Boot. This hose is a smaller diameter than that supplied in our later kits and these cars do not seem to have a tank breather pipe.
For these cars we can now offer a Single Length of Fuel Safe Hose, UK made in Fuel Safe Kevlar reinforced Blue Silicon but with an outer sheath of high shine Black to maintain period appearance in your boot area.
See image 2 Comes with 2 suitable Stainless Steel Jubilee Clips and is of course proof against E10 and higher ethanol levels