Standard 8 and 10 Door Seal - Rubber
THE CLUB's TOP-SELLING PRODUCT OF 2017, 2018, 2019 and 2020
Join all the members who have cured their rattly, drafty and leaky doors, once and for all.
These seals are much better than the original, sponge rubber type, which fortunately are no longer available.
This is a 21st centaury solution The new seal is dual thickness, it has a solid rubber foot and a hollow sponge rubber body which makes a deformable shape to fit the door aperture perfectly and also provides a rain gutter to prevent rainwater entering the car.
The seal is self adhesive, sticky backed with the latest glue. Remove the backing tape. It needs to fitted correctly first time as it can not be moved once positioned. Fitting instructions are supplied.
The seal is not handed. Supplied in cut lengths as follows:
Front door, equivalent to Stanpart 601768, length 10' 6" each,
Rear Door, equivalent to Stanpart 601667, length 9' 9" each,
Full car set, length 40' 6", at a special discount price.
Customer Feedback (verified customer)
"Just a short note regarding the length of rubber seals purchased from the club. After removing the old seal from all the doors then thoroughly cleaning where the seal attaches, the seal was cut into 4 lengths with a chalk mark in the centre of each length. After marking each door frame at the top again in the centre & carefully removing the backing from the adhesive in the centre of each seal starting from the top at the chalk mark each seal was gradually placed in the correct position with join finishing at the bottom centre after carefully butting the ends together. I also purchased the boot seal & very much the same procedure carried out same. I was very pleased with the end result. Many thanks,
Prices include VAT
Carriage, dependant on total value of the order will be added at the Checkout
Now make your choice from the options