Spin On Oil Filter Adaptor Kit for pre48 cars



This kit contains all the components you need to replace the Oil Filter, which was fitted, amongst others, to 1934-6 Standard 10 and 12 , Flying 9s and Flying 10s. It is not a substitute for Teclamit filter bowls on the side of the engine pf Prewar and Poistwar 12 and 14

The original fitting was an AC ZR1 Canister or equivalent, connected to the block by go and return pipes. These filters have not been manufactured for sometime now and are increasingly rare. They can demand high prices at Autojumbles or on Ebay. Another problem is that it is not possible to see the interior condition of new old stock, which may well be over 60 years old. Cans that have been cut open have proven to be rusty inside, or the filter element has disintegrated. We therefore do not sell New Old Stock Filters at all, but offer this modern substitute

This Replacement Kit solves the problem in a one off fashion by providing an adapter plate for the oil feed and return pipes to screw into, the other side allows a commonly available modern "Spin-on" filter to be fitted. The new filter fits into the existing clamp and there is no requirement to alter the pipe configuration.

Further replacement modern Oil Filters are also available as a separate item in this section

The photo  shows the replacement adaptor plate and one filter.

Kit Components:

  • Adapter Plate taped with screw fittings
  • New Oil Filter
  • Replacement Strap bolt and wingnut
  • 4 x fibre washers

Carriage dependent on the total order value will be added at the checkout

Earn 0 reward points with this purchase
Add This Product To Your Wishlist
Buy This Now
£0.00 £53.44

The item has been added to your basket

Continue Shopping
Proceed To Checkout