Electronic Distributor for 4 cylinder Prewar and Postwar Standards
Description
BRAND NEW ELECTRONIC DISTRIBUTORS -
TO KEEP YOUR STANDARD RUNNING THROUGH THE 21st CENTURY!
THIS IS NOT AN ELECTRONIC CONVERSION TO YOUR OLD DISTRIBUTOR, IT IS A COMPLETE BRAND NEW DISTRIBUTOR!
Your old distributor is probably worn, and with wear there can be incorrect and inconsistent dwell angles and/or contact bounce.
As a result of investment in development , manufacture and testing by the Standard Motor Club, we are now able to offer these Brand New Electronic Distributor for all 1930s and 1940's Standards *
Nothing to adjust and no points to wear out
1. There was one of three Lucas distributors originally fitted - you must inspect yours and choose the one you need to match.
- Early thirties cars such as the Big 9, some 1934 9's and 10's used the DJH4A
- Later cars of the 1930's used the DKH4A
- Postwar Standards to 1948 all used DKYH4
- Triumph Mayflower used DKYH4A
2. These were available with either a Positive Earth or Negative Earth system, you must choose the correct polarity for your car
3. There is then a choice of a "Top Entry" or "Side Entry" Cap. The components of the kit are different for the one you choose:
We sell 4 kits as follows: All prices include VAT, The price will change when you select the Distributor. UK Carriage of £6.00 will be added at the Checkout. For a quotation for carriage to other countries please contactphil.homer@btinternet.com
| Side Entry Positive Earth - Price : £144.99 | Side Entry - Negative Earth - Price: £134.99 |
| Non-Vacuum Distributor complete with Side Entry Distributor Cap Small spacing Washer 2 x Female Lucar Connectors with Insulators 2 x Small bare male Lucar Connectors 2 x Small nut, locking washers and bolts 2 x heatshrink insulator sleeves Terminated Short Connecting wire Fitting Instructions | Non Vacuum Distributor complete with Side Entry Cap Short Connecting Wire 2 x Insulated Loop Connectors A spacing washer Fitting Instructions |
| Top Entry Positive Earth - Price £149.99 | Top Entry - Negative Earth - Price: £139.99 |
| All the above items except; top entry cap instead of side entry In addition 5 HT terminals, 5 rubber boots | All the above items except; top entry cap instead of side entry In addition 5 HT terminals, 5 rubber boots |
* Please note that due to a size restriction in the Engine Bay of the Little 9, our Distributor will not fit this car
$ Comprehensive instructions are supplied but if you are not familiar with Auto Electrics, please employ a Auto Electrician. To understand the complexity of the work required, please download, print and read these Fitting Instructions:
- Positive Earth Fitting Instructions
- Negative Earth Fitting Instructions
If these instructions are followed, no existing wire is cut, so the change is completely reversible
The illustrations show both the top entry and side entry versions
| Please note: In the Club's view, Side-entry Distributor Caps are inferior because they use a "spike" connector,.Top-entry caps use the much more reliable push in HT leads. If your car currently uses a side entry cap, please consider the use of a top-entry cap. In addition, this solution comes with the correct HT connectors and rubber boots that you need to convert your HT leads to top-entry. There is a slight increase in price, for the extra components, but in our view the solution is much preferable. |
This Distributor has been trial fitted to positive and negative earth Standards. The members universally report easier starting, improved performance,smoother running and better fuel consumption. This is because of the removal of the inevitable wear in your 70 or 80 year old Distributor and the consistency of an electronically generated spark.
Please note that the "Consumables" for our Distributors, should you need them, are available in this shop at very reasonable prices
These comprise Distributor Caps, Rotors and Replacement Electronic Modules
REMEMBER - CLUB EXCLUSIVE - FOR MEMBERS ONLY, AND NOT AVAILABLE FROM ANY OTHER SUPPLIER
Carriage dependent on the total order value will be added at the checkout
Now select the type of Distributor you require, then select Side or Top Entry Cap, then select Negative or Positive Earth. Note that fitting the wrong polarity will destroy the Electronics so don't do it!